How should spraying equipment be maintained

The common maintenance methods of spraying equipment after use are as follows:
1. According to the viscosity of the paint and the particle size, choose a paint filter screen with an appropriate mesh. After spraying, the dirt on the filter should be removed in time, and the damaged filter should be replaced in time.
2. When diluting the paint or cleaning the equipment, it is necessary to use the solvent specified by the paint to avoid abnormal deposition or agglomeration of the paint, blocking the paint filter, high-pressure valve port, high-pressure pipeline and spray gun, and other channels, and cannot be sprayed. Especially when diluting the paint, it must strictly follow the technical requirements of the paint to avoid affecting the performance of the paint.
3. The two major components of the cylinder and the gas distribution system should not be scrubbed with strong organic solvents, and should not be immersed in strong solvents. All rubber seals in the equipment can only be cleaned with gasoline or non-solvent cleaning agents.
4. Air cylinders, gas distribution systems, upper and lower pilot valves, lubricators, pressure regulators, and other gas path components should not enter rust, sand, dust, and other stolen goods during assembly after cleaning and maintenance. Foreign matter on the air intake filter element should be removed regularly to prevent the air intake from being reduced.
5. After spraying, the equipment should be cleaned in time. Otherwise, the cured and agglomerated paint will aggravate the wear of the paint cylinder, piston rod, sealing ring, and other parts, and shorten the service life of the equipment.
6. During maintenance, if you need to replace the seals (rubber or PTFE), paint cylinders, piston rods, pressure-bearing parts of the paint hydraulic system, springs, air motors, gas distribution systems, and other important parts, please choose Our company provides original supporting products to ensure the normal operation of the equipment.