Do you know how the flocking machine should choose the embryo cloth?

How to choose grey fabric for flocking machine
Four parameters should be paid attention to when selecting grey fabrics: high conductivity, uniformity of material organization, porosity, and co-compatibility with adhesives. In addition, the base fabric should be selected according to the use of flocking products. For example, heavy fabrics should be used as base fabrics for curtains, felts, and decorations, while light fabrics are preferred for flocking fabrics used for clothing and hats. The raw materials of the base fabric are generally pure cotton, chemical fiber or a blend of the two, but the fabrics of spandex and polypropylene fibers are not suitable for flocking base fabrics due to their poor heat resistance.
In addition, elastic fabrics with shrinkage and untreated chemical fiber fabrics should not be used as flocking base fabrics, because the width of these types of base fabrics shrinks drastically when flocking. To sum up, as a general flocking base fabric, it is required that its warp and weft density should not be too sparse, and the surface should not have defects and unevenness; good color fastness, no discoloration during pre-baking and baking; small elasticity to prevent Cause the suede to wrinkle; the base fabric should be resistant to high temperature. In addition, it is necessary to pay attention to the coordination of the base fabric and the fluff tone, that is, to ensure that the tone is basically the same or similar. Because if the warm-colored fluff is planted on the cool-colored base cloth, the color will be dim; while the cool-colored fluff is planted on the warm-colored base cloth, the color will become lighter. The white fluff must be planted on the bleached base fabric to reflect better whiteness.

WX-K3 SMART TYPE POWDER COATER/ INTELLIGENT POWDER SPRAYING MACHINE

Smart type powder coating system WX-K3, it offers 3 pre-set standard application programs for flat parts, profiles and re- coat
Allows you to set and store your own application programs, optimized for your parts and powder. Each parts can be coated always with its ideal settings .
Independent control of powder output, Airflow, gun voltage and current.