What are the advantages of powder coating equipment？

The coating used in powder coating equipment coating is powder coating. It is a new type of coating that does not contain organic solvents or water, is coated in powder form, and is melted or cross-linked to solidify to form a new coating film. Powder coating and its coating technology are another technological revolution in the coating industry and coating profession after water-soluble electrophoretic coatings.

Seven advantages of powder coating equipment coating:
1. No solvent. Powder coating is a solid coating with a solid content of 100% and does not contain any solvents. Therefore, it is safe to produce and apply. It can reduce pollution, prevent public hazards, and is beneficial to environmental protection. It is especially suitable for popularization and application in densely populated towns. It is a more ambitious low-pollution paint.

2. The paint loss is small and the original material utilization rate is high. During the coating process, the powder is completely coated on the surface of the target to be coated. The excess powder can be recovered and reused. The recovery rate of the powder can reach more than 99%. The utilization rate can reach more than 95%, which is much higher than the utilization rate of water-soluble coatings and high-solid coatings.

3. Short coating cycle and high production efficiency. The curing time of powder coating is shorter than that of solvent-based coating, and the process is relatively simple. Generally, only 3-4 processes such as workpiece pretreatment, spraying, baking and curing are required, while traditional paint coating needs to spray primer, There are more than ten processes of "three grinding and three copying", such as scraping putty, water milling, spraying paint, etc., so it can shorten the coating time and simplify the process, so that the work efficiency is improved by 3-5 times.

4. Good film performance. There is no solvent evaporation during the coating film composition process, so it is not easy to show defects such as pores, and it is easy to obtain a fine coating film, which can fully cover the edge of the coated object, and the coating color is bright and gorgeous, and it has good adhesion to the metal. ,strong and sturdy.

5. Thick coating is possible. Generally, the film thickness is 50-300μm, which is equivalent to multiple paint coatings, and saves time and labor, and facilitates the completion of coating automation. At the same time, it can avoid the defects such as sag, stagnation, sag, and pores that often appear in thick film coating. It can reduce discarded materials by about 90%, and there are few defective products due to appearance defects, which can be reduced to 1/4.

6. Save energy and resources. The baking time of powder coating is generally less than 30 min., which is much shorter than that of various types of baking, which greatly saves energy and resources. It can reduce energy consumption by 30%-50%.

7. Compared with other types of coatings, the cost of powder coating equipment coating is lower, and it has obvious economic benefits.

Found in 2006, Hangzhou Guozhen WanXin Coating Equipment Manufacturing Co.,Ltd is a professional China Powder Coating Equipments Manufacturers and Powder Coating Equipmens accessories dactory, our company that integrates R & D, production and sales, specializing in the manufacturing of powder coating equipment and flocking machines , our company found in 2006, located in Hangzhou city, and the production base in Jiangsu province, our factory covers an area of about 24,000 square meters , we has advanced production equipment, supporting facilities and a complete range of testing instruments.Powder coating equipment including: powder coating machines, Automatic powder coating systems, Powder coater, Powder Coating booth ,Cyclone type powder coating recovery system,Ovens, powder coating production line and various spare parts for different brand powder guns. Flocking equipment including: Printing flocking machine, Box-type flocking machine, portable flocking machine, Spray gun type Flocking machine and Automatic flocking lines and so on. WANXIN products are in line with international standards and have passed a number of quality certifications, such as CE, SGS , ATEX, ISO9001, Welcome!