What should I pay attention to most when spraying?

Matters needing attention when spraying: 1. When spraying objects with complex shapes, if there are corners, inner and outer surfaces, spray the inner corner first, then spray the outer corner, and spray in the order of the inside first, then the outside, and the difficult first, then the easy. .
2. After spraying, the flat plate and other objects should be dried in a well-ventilated drying room. The ventilation of the drying room should not be too large. The exhaust air should be installed below 1 meter from the ground to prevent dust in the drying room. Flying.
3. The ventilation of the spray room must be good, so that the paint mist during spraying can be discharged outside in time. At the same time, the exhaust fan in the spray booth should be installed in front of the spray booth or slightly downward to prevent the flying paint mist from rising.
The dust on the exhaust fan should be removed frequently to prevent excessive dust from causing fire hazards.
4. Familiar with the relevant piping system and operating points centered on the air compressor, regularly discharge the liquid from the air compressor and the oil-water separator, and do not allow the liquid from the air compressor and the oil-water separator to be sprayed through the air hose On the surface of the object to be coated, so as not to cause bubbles, pitting, whitening, oiliness, etc. of the coating film.
5. Before spraying and after spraying, the spray gun must be cleaned with a clean solvent to prevent paint residue from clogging the muzzle.
6. The components must be adjusted according to the requirements of the paint manufacturer, the paint solution shall be filtered with spun silk cloth, and the thinner shall be used to adjust the construction viscosity.

Found in 2006, Hangzhou Guozhen WanXin Coating Equipment Manufacturing Co.,Ltd is a professional China Powder Spray Booth Manufacturers and Powder Spray Booth Factory, our company that integrates R & D, production and sales, specializing in the manufacturing of powder coating equipment and flocking machines , our company found in 2006, located in Hangzhou city, and the production base in Jiangsu province, our factory covers an area of about 24,000 square meters , we has advanced production equipment, supporting facilities and a complete range of testing instruments.Powder coating equipment including: powder coating machines, Automatic powder coating systems, Powder Coating booth ,Cyclone type powder coating recovery system, Ovens, powder coating production line and various spare parts for different brand powder guns. Flocking equipment including: Printing flocking machine, Box-type flocking machine, portable flocking machine, Spray gun type Flocking machine and Automatic flocking lines and so on. WANXIN products are in line with international standards and have passed a number of quality certifications, such as CE, SGS , ATEX, ISO9001, Welcome!